angles: 2 scale: 8:1 drawing drawn cwb cwb customer 04/11/08 by er7306 description d rev xx/xx/xx xxx date approved 05/16/07 wpm date approved 05/16/07 dcam date approved 03/08/07 psm date appd date revised per per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx 1 sht of wallingford, connecticut 06492 lec SD01432G ronics 18 awg, 10 amp rev right angle solder mount a power snap, t d w inches t er e winchester electronics corporation 62 barnes industrial road north 1 .144 pin accepts .314 .275 6.99 .144 3.66 7.98 .054 .003 1.37 .08 recommended cable trim dimensions equivilent 18 awg or .275 6.99 .218 5.54 across flats catalog p/n: 01432g notes: unless otherwise specified 1. for general series specifications, see sd74-0000. 2. material specifications: copper alloy 3. finish specifications: .000030 min. gold per astm b488 over .000080 min. nickel per ams qq-n-290. 4. electric al specifications: current rating: 10 amps 5. for use with 16 awg wire or equivalent. 6. refer to cap10-01 for cable assembly procedure.
|